MARTIN T60C

With the T60C saw, we want to respond to the increasing demand for well-equipped mid-range machinery. You can get this machine, which is based on the T60A frame, at a surprisingly favorable price. It is equipped with a 3.5? keypad controller at eye level, a powerful 7.5 HP motor with three rotational speed options, 53″ rip capacity as well as MARTIN?s exclusive hand-wheel adjustment of the rip fence. The T60C Automatic includes a motorized adjustment of the rip fence in lieu of hand-wheel version.

Like all the important mechanical components of the MARTIN saw line, the T60C?s sliding table, cross-cut fence and rip fence provide maximum precision and long life. The sliding table is designed like you would expect a MARTIN machine should be: with a replaceable table lip and durable, highlyribbed, hollow chambered aluminum profile. Other key features include the smooth movement of the two stop elements along the cross-cut fence rail; both of which.

On the T60C the rip fence is adjusted manually to a digital read-out. Standard features include a precise fine adjustment and mounting rack for the fence when the fence is removed from the table. The fence?s sophisticated guide system with four grooved ball bearings ensures long-term reliability.

With the T60C system, the scoring position and scoring height can be adjusted quickly and easily via controller. As is the case with conventional systems, the scoring width is adjusted with shims. Lifting and lowering the unit is done pneumatically. Depending on the task at hand the unit can be switched on and off without losing precious time and the settings can be stored.

??? 3.5? TFT colour screen at eye level included
??? Electronically controlled cutting height and angle included
??? Hand wheel adjustment for rip fence included
??? (Motorised adjustment of rip fence included T60C Automatic)
??? Digital indication of the cutting width integrated in the control
??? Fine adjustment of the rip fence included
??? Cutting width 1350 mm included
??? Sliding table length 3000 mm included
??? Max. cutting height 130 mm included
??? Fine adjustment on both cross-cut stop elements included
??? Individual configuration with a wide range of accessories.

MARTIN T65

The massive cutting height of 204 mm and the tilting angle of 0 to 46? provides greater flexibility for complex tasks. With the ProLock-System, the main as well as the scoring saw blades can be replaced quickly and easily. The rotational speed is easily changed via belt/pulley through an opening in the cast iron trunnion behind the main saw blade. With the optional variable speed control the RPM?s can be adjusted to a wide variety of different man-made materials. You simply enter the desired rotational speed of the saw blade without having to turn off the machine.

The calculation of the length compensation for angle cuts comes as a standard on even the most basic T65. The optional ?RadioCompens? angle cutting system takes things one step further and reduces set-up times by more than 80%. You simply set the radio controlled miter cross-cut table to the desired cutting angle. The radio-controlled electronics take care of the rest. You always get the correctly calculated measurements on both displays of the digital length stops. You can still demount the cross-cut fence as well as the cross-cut table from the machine without any problem since the communication is radio-controlled.

The rip fence of the T65 can easily be manually moved and thanks to the standard fine adjustment can be set very precisely. The precision rip fence?s wear-free grooved ball-bearing guide system further ensures maximum precision and allows the fence to glide over the table smoothly and without support. If large panels have to be cut, where the machine table must be cleared, the rip fence can be removed from the carriage in no time at all. With the optional hand-wheel, the cutting dimension can be indicated from the operating position over the full cutting width.

Get cutting edge performance for your entry level class saw and experience the unique user guidance of the MARTIN touchscreen controller at eye level. The positioning of the controller at eye level offers major advantages. With the 5.7? touchscreen controller the operator is guided through complex work processes easily, quickly and accurately. All relevant information is visible at a glance.

VacuSlide is an efficient and intelligent clamping system for? panel material made of wood, plastic or non-ferrous metals. It offers excellent performance especially if thin and/or delicate materials have to be clamped or bevel as well as mitre cuts have to be made. Workpieces up to 110 mm wide can be securely clamped. Preselection is not necessary. VacuSlide is activated or deactivated via radio remote control. Delivery includes: vacuum generator, remote control,? reverse flow filter as well as low pressure warning device. Cannot be used in combination with the motorised sliding table or when the rip fence is set via hand wheel.

MARTIN T70

The 2-axis system is completely user-friendly. Full integration into the touchscreen controller facilitates the input of all necessary settings. The left/right positioning of the scoring saw in relation to the right shoulder of the main blade and the scoring height is adjusted automatically. The kerf width is adjusted with stacked shims. If you combine the 2-axis scoring saw with the T7022 ScribeMaster saw blade system, the kerf width can be adjusted in a matter of seconds. With inserted scoring saw blades you can use main saw blades of up to 400 mm in diameter. If you remove the scoring saw blades and the flange you can easily work with saw blades of up to 550 mm in diameter. The patent pending MARTIN 3-axis scoring saw system is fully integrated in the controller and facilitates the input of all necessary settings. The fully integrated scoring saw is linked to the touchscreen?s tool menu, allowing the automatic positioning of the scoring saw width to match every main saw blade that has previously been entered into the controller. The system needs to be calibrated only once. Time-consuming sample cuts are avoided almost completely. Thanks to a quick clamping system the scoring unit of the 3-axis scoring saw can be completely removed or changed within seconds. This is important, especially if you want use saw blades in excess of 400 mm in diameter. Time consuming procedures are avoided almost completely.

The T70?s solid and heavy machine frame that is reinforced with a concrete composite is unique and in the woodworking machinery industry only to be found on MARTIN machines with this technical perfection. Otto Martin invented this method of construction in the 1920s and had it registered as a patent back then. Today, after 90 years of continual improvement, MARTIN still uses this simple and effective type of frame construction. The combination of steel and concrete create a high quality machine frame that is unparalleled when it comes to sturdiness, absorbing capacity and torsion resistance. This design has been proven to have up to six times the vibration dampening properties than that of a traditional cast-iron or welded frame.

To enter a new value for a particular axis into the controller, just touch the respective number field. The screen immediately changes its input mode, enabling you to enter new numerical values. The numeric keypad not only indicates the minimum and maximum allowable input values that the machine will take, but also memorizes the last five input values for rapid recall. The integrated calculator can also be used if necessary. On the ?HOME? page, rapid access icons can be created and unused icons can be deleted. This way you can keep track of the current machine values. For the precision calculation of your cuts and quick tool change you can store up to 100 different saw blades in the tool menu. A saw blade that has been stored once is immediately available and fully integrated in the controller. This way the 3-axis scoring unit automatically adjusts to the kerf of the main saw blade. Time consuming test cuts can be omitted almost completely and you can concentrate on the task at hand.

The machine can be connected to a computer by an optional data interface. This way the T70 can be connected to the MARTIN editor or to other panel-cutting optimization software programs like ARDIS?, Boole&Partner?, Vlecad?, CAD-code? or PatternSystems?. With the optional CPOUT interface you can connect your machine to almost any software that you would like to use. This way the machine operator is guided through the work process very efficiently which leads to more accurate results and efficient use of the resources at hand.

VacuSlide is an efficient and intelligent clamping system for? panel material made of wood, plastic or non-ferrous metals. It offers excellent performance especially if thin and/or delicate materials have to be clamped or bevel as well as mitre cuts have to be made. Workpieces up to 110 mm wide can be securely clamped. Preselection is not necessary. VacuSlide is activated or deactivated via radio remote control. Delivery includes: vacuum generator, remote control,? reverse flow filter as well as low pressure warning device. Cannot be used in combination with the motorised sliding table or when the rip fence is set via hand wheel.

MARTIN T75

With the possibility of tilting the saw blade of the MARTIN sliding table saw by 2 x 46? it is now up to the operator to decide how to machine a workpiece and not up to the machine. Regardless of whether it comes to the cutting quality, safety or time saving the T75 PreX makes it easy for you to decide which machine you should buy. It is easy to operate and you can decide how you want to set up the machine for the process to be performed.

The T75?s cross-cut fence has hardly been affected by the doubling of the tilting angle to 92?. You get a premium cross-cut fence that can be pushed back to a safety position when you tilt the saw blade to the left. This way it makes room for the blade guard that now protects this space.Thanks to the clever design of the extension mechanism, its blow-out block can be used as backing plate regardless of where the fence is positioned. The T75?s cross-cut fence has a perfect contact surface for short work pieces even if it is pushed back into the safety position. This way your cutting results are always perfect.

The T75 PreX is also equipped with the efficient and user friendly touch screen controller, that has been a MARTIN standard since 2006. Step by step, the operator enters all the necessary parameters and is guided through the process by the controller. All the necessary adjustments are done automatically. This speeds up work and leads to a more intuitive understanding of the machine?s function by the operator.

The patent pending 3-axis scoring saw unit is fully integrated in the controller and facilitates the input of all necessary settings. The 3-axis scoring height, relation to main blade and kerf width are positioned automatically. Thanks to a quick clamping system the scoring unit can be completely removed or changed within seconds. Time consuming procedures are avoided almost completely.

VacuSlide is an efficient and intelligent clamping system for? panel material made of wood, plastic or non-ferrous metals. It offers excellent performance especially if thin and/or delicate materials have to be clamped or bevel as well as mitre cuts have to be made. Workpieces up to 110 mm wide can be securely clamped. Preselection is not necessary. VacuSlide is activated or deactivated via radio remote control. Delivery includes: vacuum generator, remote control,? reverse flow filter as well as low pressure warning device. Cannot be used in combination with the motorised sliding table or when the rip fence is set via hand wheel.